Today I will show you how you can easily bypass Google FPP Lock. And you can get your phone back as before. In this tutorial, I share with you the latest method to Samsung A10 FRP Bypass Via Combination ROM by following some easy steps.
Factory Reset Protection (FRP) automatically will be activated on your device. If it is logged in to Google account, and you reset your mobile. Once FRP is activated, it prevents the use of a device after a factory reset or Hard reset. If you know the password for your previously logged ID, you can easily bypass the Google FRP lock by connecting to a Wi-Fi network. But when you forget the password then to locked out of Google account, you need to remotely log in to your logged-in Google account, and you will have to log in a new Google ID.
Samsung Galaxy A10 summary:
Samsung Galaxy A10 smartphone was Released in February 2019. The phone runs Android 9.0 (Pie); One UI. It comes with a 6.2 inches” touchscreen display with a resolution of 720 x 1520 pixels and screen type is IPS LCD capacitive touchscreen. Galaxy A10 is powered by an Octa-core 2×1.6 GHz processor. It comes with 32GB internal memory and 2GB of RAM. The Samsung A10 is powered by a Non-removable Li-Ion 3400 mAh battery. Samsung A10 on the rear packs a 13 mp camera. and a 5mp camera on the front for selfies. Connectivity options on the Galaxy A10 include Wi-Fi, GPS, FM radio, 3G, and 4G. Sensors on the phone include an accelerometer, proximity sensor. The Samsung Galaxy A10 dimensions 155.6 x 75.6 x 7.9 mm (height x width x thickness).
Before starting Samsung A10 FRP Bypass via Combination ROM, you need to download these programs:
- Download Samsung Odin3 Latest Version:
- Samsung A10 Combination ROM:
Samsung A10 FRP Bypass Via Combination ROM:
Step 1: Active Download Mode to your Samsung A10 smartphone.
1.1: Hold on Power Button and Turn OFF Samsung A10.
1.2: Press and hold at the same time on the Power Button + Volume Up Button.
1.3: When you see the Recovery Mode release all buttons.
1.4: From the Recovery Mode option, select Reboot to Bootloader and then press on the Power button to confirm.
1.5: Now Connect your Samsung A10 to your computer using the USB cable.
Step 2: Run Odin3.exe Program on your PC.
Step 3: When open Odin3.exe, click on “AP” and import the Samsung A10 Combination ROM file.
Step 4: after import, click on Start to start the installation.
Step 5: Once the PASS message displayed, unplug your Samsung A10 from pc.
Step 6: Now Power ON your Samsung A10 by pressing Power Button.
6.1: Go to the Settings then scroll down and touch and select About Phone.
6.2: From About Phone scroll & find build number.
6.3: touch 7 (seven) times on build number.
6.4: Developer Options active find the Previous screen.
6.5: Press and check USB debugging mode.
Final Step: Now Install a new stock ROM in your Samsung Galaxy A10 from HERE
I hope the tutorials will help you. If there is any problem during the time of bypassing the FRP on your mobile, please comment in the comment box below. Thank you so much for reading this post!
